RS232 Landline Phone PCB Board

HZ-TB01D

The HZ-TB01D RS232 landline phone PCB board combines two-wire analogue telephone communication with standard RS232 command control for OEM hands-free telephones and intercoms.

True full-duplex audio, three speed-dial inputs and standard keypad, LCD and hook-switch interfaces support industrial and elevator communication terminals. The handset connector is reserved in hardware and requires corresponding firmware.

The main telephone circuit is line-powered. A 7–12 V DC auxiliary input supports the loudspeaker or warning lamp; use 12 V DC when connecting the 2 W / 8 Ω loudspeaker or a 12 V warning lamp.

Key Features

Standard RS232 Control

Integrate command communication through a standard RS232 electrical-level interface alongside a two-wire analogue telephone line.

Full-duplex Hands-free Audio

Current voice operation supports true full-duplex hands-free communication, with microphone and 2 W / 8 Ω loudspeaker connections.

Three Speed-dial Inputs

PTT1, PTT2 and PTT3 connections support speed-dial buttons. Keypad, LCD and hook-switch interfaces are standard.

Line Power & Auxiliary DC

The main telephone circuit uses analogue line power. Use a 12 V DC auxiliary supply for the 2 W loudspeaker or 12 V warning lamp.

Call Control & Optional Output

Call-duration limitation and automatic hang-up upon busy-tone detection are standard. Dry-contact output is optional.

OEM Integration Options

Project-based RS232 commands, calling logic, connectors, cables and documentation can be configured. Handset operation requires corresponding firmware.

Technical Specifications

ParameterSpecification
ModelHZ-TB01D
Product TypeRS232-controlled analogue telephone PCB
Primary ApplicationHands-free analogue telephone and intercom integration
CommunicationTwo-wire analogue telephone line
RS232 InterfaceCommand communication; standard RS232 electrical level
Main Power SupplyPowered by the analogue telephone line
Auxiliary DC Input7–12 V DC; use 12 V DC for the 2 W / 8 Ω loudspeaker or 12 V warning lamp
Line Feeding Voltage33–60 V DC
Dialling MethodDTMF tone dialling
Voice ModeTrue full-duplex hands-free communication
Reserved Handset InterfaceHardware connector reserved; corresponding firmware required
Keypad / LCD / Hook-switchSupported as standard
Speed-dial Inputs3: PTT1 / PTT2 / PTT3
Standard Call FunctionsCall-duration limitation; automatic hang-up upon busy-tone detection
Dry-contact OutputOptional
Loudspeaker Connection2 W, 8 Ω
Ringing Sound Level>80 dB(A) at 1 m; 2 W speaker
DTMF Frequency GroupsLow: 697 / 770 / 852 / 941 Hz; high: 1209 / 1336 / 1477 Hz
Frequency Deviation−1.5% to +1.5%
Call Transmission IndexAt 5 km: SLR <12 dB; RLR <−1 dB; STMR >10 dB
Output Impedance600 Ω
Operating Temperature−40°C to +85°C
Relative Humidity10%–95% RH
Atmospheric Pressure86–106 kPa
ReliabilityMTBF: 100,000 hours; MTTR: 2 hours
PCB Dimensions98 × 70 × 15 mm
Mounting-hole Spacing80 × 50 mm
Net Weight0.23 kg per PCB
Gross Weight7.2 kg per 30-piece carton
Carton Quantity30 pcs/carton
Carton Dimensions370 × 300 × 150 mm
Packing TypeCarton box
Warranty12 months of defect warranty by the manufacturer

Integration notice: During PCB testing and installation, avoid touching metal parts directly by hand to prevent short circuits or PCB damage. Handset operation and optional outputs depend on the approved hardware and firmware configuration.

Dimensions & Mounting

HZ-TB01D PCB dimensional drawing 98 by 70 mm with 80 by 50 mm mounting centres
HZ-TB01D · Dimensions in mm · Click to enlarge

Customization & Project Support

Enclosure & AppearanceCoordinate PCB integration, branding and custom labels for the intended telephone enclosure and project.

Calling & ConfigurationSpecify approved RS232 commands, speed-dial functions and call-control logic. Handset operation requires corresponding firmware.

Interface & InstallationDiscuss connectors, cables, buttons, handset, warning lamp, LED and optional dry-contact requirements.

Documentation & PackagingRequest custom labels, product specifications, user manuals and package markings. Standard packing is 30 PCBs per carton.

Applications

For OEM integration into analogue communication equipment:

  • Emergency telephones and industrial help points
  • Weatherproof and vandal-resistant telephone terminals
  • Prison and public telephones
  • Emergency and elevator intercom terminals
  • Cleanroom communication equipment
  • Customized analogue telephone systems

Product: HZ-TB01D — RS232 Landline Phone PCB Board

REQUEST A QUOTE

Shenzhen HeoZ Technology Co., Ltd.

Please contact HeoZ for product selection, OEM/ODM customization, technical support or project quotation.

Email:
Pricing & Project Support:
sales1@heoztech.com
General Contact:
info@heoztech.com

Mobile / WhatsApp:
Pricing & Project Support: +86 199 2645 9261
Technical Support: +86 181 2372 5966

Address: Room 601, Building 2, Jingyefang Industrial Park, No. 1 Fengxing Lane, Fenghuang Community, Fuyong Street, Bao’an District, Shenzhen, China 518103.

Pricing & Project Support: sales1@heoztech.com
WhatsApp: +86 199 2645 9261